Short course300 h · Online · 5 modules

Battery and Energy Storage Integration Course

This course gives you the knowledge and practical skills to design, install and maintain efficient and safe energy storage systems. You will learn everything from the fundamentals of electrochemistry to choosing the right battery for each application, including solar installations, electric vehicles, backup power and microgrids, and master the sizing, wiring, protection, thermal management and monitoring of battery systems to ensure optimum performance and a long service life.

Duration300 h
ModeOnline
Start1 December
Modules5
Program diagnosis

Prior knowledge check

These are the skills this program gives you. Tick the ones you already master and we will tell you which part of the syllabus is for you.

Your diagnosis
6of 6 to cover

You are starting from scratch in this subject. The program is designed precisely for that.

About the program

What is the Battery and Energy Storage Integration Course?

This short course prepares you to integrate batteries and accumulators into modern electrical systems of any scale. You will study the electrochemical principles of energy storage and the main chemistries, from lead-acid, nickel and sodium to lithium-ion, LFP and NMC, with the parameters used to select them; the electrical design of series and parallel configurations, system sizing, integration with bidirectional converters and inverters, protection, pre-charge, cabling and busbars; battery management systems, cell balancing, SOC and SOH estimation and communication with EMS and SCADA; and the safety of storage systems, including thermal management, thermal runaway, functional safety, testing and documentation of compliance.

What sets this course apart: a technology-neutral approach that compares several chemistries and architectures instead of focusing on a single product; coverage of stationary storage, backup systems, hybrid installations, microgrids and traction applications; a strong focus on safety, thermal management and emergency response; practical simulated cases aligned with current technical standards; and an integrative project in which you design, integrate and validate a complete battery system for a real or simulated application.

Program typeShort course
ModeOnline
Duration300 hours
Modules5
Start1 December

Program highlights

  • Electrochemistry: capacity, energy density, C-rate, depth of discharge and expected service life.
  • Chemistries compared: lead-acid, Li-ion, LFP, NMC, nickel, sodium and emerging technologies.
  • Electrical design: series-parallel configuration, sizing, inverters, protection and pre-charge.
  • BMS and monitoring: cell balancing, SOC and SOH estimation, EMS and SCADA integration.
  • Safety: thermal management, thermal runaway, interlocks, safe shutdown and compliance testing.
  • Integrative project: design and validation of a complete storage system with cost and risk analysis.
Syllabus

Syllabus of the Battery and Energy Storage Integration Course

5 modules. Select a module to see its content.

Module 1

Electrochemical foundations, storage technologies and functional integration of batteries and accumulators in modern electrical systems

  • 1.1. Electrochemical principles of energy storage: potential, capacity, energy density, specific power and charge-discharge mechanisms
  • 1.2. Types of batteries and accumulators: lead-acid, lithium-ion, LFP, NMC, nickel, sodium and emerging technologies for different applications
  • 1.3. Key technical selection parameters: nominal voltage, capacity, C-rate, depth of discharge, efficiency and expected service life
  • 1.4. Functional architecture of a battery system: cells, modules, racks, buses, protection and auxiliary integration elements
  • 1.5. Applications of battery integration: backup, traction, hybrid systems, self-consumption, microgrids and load stabilization
At this stage
60 hestimated workload
5 wkweeks at your pace
Module 2

Electrical design, modular configuration and integration of batteries with converters, loads and distribution systems

  • 2.1. Series and parallel configuration of cells and modules: voltage, current, balance and design safety criteria
  • 2.2. Sizing the storage system: autonomy, peak power, operating cycles and degradation margin
  • 2.3. Integration with converters and inverters: DC/AC compatibility, bidirectional converters and control of energy flow
  • 2.4. Electrical protection of the system: fuses, contactors, circuit breakers, pre-charge, insulation and protection coordination
  • 2.5. Cabling, busbars, connections and electrical layout: voltage drop, heating, accessibility and safe maintenance
At this stage
60 hestimated workload
5 wkweeks at your pace
Module 3

Battery management systems, monitoring, balancing and smart control of energy performance

  • 3.1. Essential BMS functions: monitoring of voltage, current, temperature, state of charge and state of health
  • 3.2. Cell balancing strategies: passive and active balancing and criteria for choosing them according to chemistry and system architecture
  • 3.3. SOC and SOH estimation algorithms: coulomb counting, models, filters and tracking of degradation
  • 3.4. Communication and integration of the BMS with EMS, SCADA and automation systems: protocols, alarms and data traceability
  • 3.5. Continuous monitoring and operational analytics: early detection of anomalies, trends and support for predictive maintenance
At this stage
60 hestimated workload
5 wkweeks at your pace
Module 4

Safety, thermal management, operational risks and technical compliance in battery integration

  • 4.1. Technical and operational risks of batteries and accumulators: short circuit, overcharge, overtemperature, leakage and internal failure
  • 4.2. Thermal management of the system: passive and active cooling, HVAC, heat dissipation and control of temperature gradients
  • 4.3. Thermal runaway and critical events: causes, warning signs, mitigation, containment and emergency response
  • 4.4. Functional safety and operating procedures: interlocks, isolation, safe shutdown and intervention protocols
  • 4.5. Regulatory requirements, testing and technical validation: acceptance criteria, documentation and evidence of conformity
At this stage
60 hestimated workload
5 wkweeks at your pace
Module 5

Integrative project: design, integration and validation of a battery and accumulator system for a real or simulated application

  • 5.1. Definition of the case study: target application, load profile, energy requirements and operating constraints
  • 5.2. Selection of technology and system architecture: chemistry, modular configuration, converters and integration scheme
  • 5.3. Design of the protection system, BMS and thermal management: safety, control and operational continuity criteria
  • 5.4. Operation, monitoring and maintenance plan: KPIs, alarms, inspection routines and strategy to extend service life
  • 5.5. Technical and economic assessment and risk analysis: expected performance, total cost, contingencies and feasibility of implementation
At this stage
60 hestimated workload
5 wkweeks at your pace
Plan your pace

Duration and format of the Battery and Energy Storage Integration Course

It is 300 hours. Tell us how many you can study each week and we will tell you when you will really finish.

4 h30 h
With 12 h per week
6
months to finish
25 weeks
weeks in total

This is the pace at which most students finish. It fits well with the installment plan.

Faculty

Academic leadership and faculty

The Navalis teaching team: working professionals who teach and supervise the programs.

Dra. Marina AlcoverDr. Marina AlcoverAcademic Director and Head of Quality Assurance
Ing. Diego CifuentesEng. Diego CifuentesSenior Lecturer in Naval Welding and Non-Destructive Testing; Head of QA/QC for Welded Joints
Cap. Javier Abaroa (MCA)Capt. Javier Abaroa (MCA)Senior Lecturer in Ship Handling, Electronic Navigation (ECDIS/Radar/ARPA) and GMDSS; STCW Compliance and Bridge Resource Management Coordinator
Dr. Pau FerrerDr. Pau FerrerSenior Lecturer in Naval Architecture and Simulation; Director of the Hydrodynamics and CFD Laboratory
Dra. Nuria LlobregatDr. Nuria LlobregatSenior Lecturer in Marine Meteorology, SAR and Operational Safety; Navigation Risk Management Coordinator
Ing. Javier BañulsEng. Javier BañulsSenior Lecturer in Electrical Engineering, Automation and ETO Engineering; Electronic Integration and Engine Alarms Coordinator
Ing. Sofía MarquinaEng. Sofía MarquinaSenior Lecturer in Materials, Composites and Corrosion Protection; Coordinator of the Advanced Paints and Coatings Line
Ing. Tomás RieraEng. Tomás RieraSenior Lecturer in Propulsion, Alternative Energy and Hybrid Systems; Energy Performance and Vibration Coordinator
Objectives

Objectives of the Battery and Energy Storage Integration Course

01Manage the logistics of storing and transporting batteries, planning routes and resources to reduce costs and time while complying with safety and environmental rules.
02Assess the condition and remaining life of batteries and accumulators through charge and discharge tests, impedance analysis and review of usage and maintenance history.
03Apply disassembly and reconditioning techniques, following technical manuals and safety rules to identify, clean and assess components for reuse or disposal.
04Comply with current environmental and safety regulations, handling hazardous and non-hazardous waste according to protocol, minimizing environmental impact and keeping proper records.
05Improve waste management and recycling, with strategies for minimization, separation at source and recovery of recyclable materials in line with circular economy principles.
06Diagnose faults and carry out preventive maintenance, finding the root cause with diagrams, manuals and diagnostic tools while putting safety and regulatory compliance first.
Careers

Career opportunities after the Battery and Energy Storage Integration Course

01Installation and maintenance technicianinstalling, configuring and maintaining batteries and accumulators in different environments.
02Energy storage systems specialistdesigning, developing and managing battery-based storage systems.
03Quality control technicianinspecting and verifying the quality of batteries during manufacture and storage.
04Technical sales advisertechnical advice on batteries and storage solutions for industrial, commercial and residential clients.
05Renewable energy technicianintegrating batteries into solar, wind and other renewable installations.
06Battery recycling operatormanaging and processing used batteries to recover valuable materials.
Frequently asked questions

Questions about the Battery and Energy Storage Integration Course

To store electrical energy in chemical form so that it can be used later, whether as backup, to shift solar production to the evening, to stabilize loads or to power a vehicle.

Lead-acid, lithium-ion with LFP and NMC chemistries, nickel and sodium batteries and emerging technologies, compared by energy density, power, cycle life, safety and cost.

It takes a broader, technology-neutral view of storage integration across stationary systems, backup, microgrids and traction, with more depth on converters, EMS and SCADA integration and thermal runaway.

Yes. The BMS module covers SOC and SOH estimation with coulomb counting, models and filters, as well as passive and active cell balancing.

No. A basic understanding of electricity is enough to start, as the course begins with electrochemical fundamentals. The admission interview will confirm that it fits your profile.

You define an application and its load profile, select the chemistry and architecture, design the protection, BMS and thermal management and prepare an operation plan with a technical, economic and risk assessment.

Fully online, through a virtual campus available 24/7, with simulated practical cases, live sessions that are recorded and tutorials with the teaching staff.

The course comprises 300 hours of study across 5 modules of about 60 hours each and ends with an integrative project. You can progress at your own pace within the schedule set when you enroll.

Related programs

More programs in Machinery and electrics

View the whole area →

Short course · 300 hVessel Sensors and Telemetry Course$390 · View program →Professional diploma · 800 hProfessional Diploma in Autonomous Vessels and Electric Boats$1,140 · View program →Short course · 300 hInboard Petrol Engines and Sterndrives Course$620 · View program →
Online admission

Admission process

No waiting for a call back. If your documents are in order, you can enroll in the same session.

Entry requirements
  • Profile: aimed at maintenance technicians specializing in energy storage, electrical and electronic engineers working on renewable systems or electric vehicles, PV installers, automotive professionals working on electrification, and students and recent graduates in technical fields; a vocational qualification in electricity, electronics or renewable energy, or professional experience in installing or maintaining electrical systems, together with a basic understanding of electricity, is recommended.
  • Language: sufficient command of English to follow the classes and the technical documentation.
  • Technical resources: a computer with a stable internet connection, an up-to-date browser and software to view PDF documents.
  • Admission: online application, review of your profile and a short interview with the academic team.
  1. 01
    Application
    Your details, background and documents.
  2. 02
    Instant review
    We check that everything is complete and in order.
  3. 03
    Enrollment
    Choose full payment or instalments and reserve your place.
Start my applicationFrom $168 deposit

Admission is provisional until the committee validates the documents provided. If you do not meet the requirements, the full amount is refunded.

Any questions?

Ask us before you enroll

Leave your details and admissions will write to you to answer any questions. If you are already sure, you can apply and pay in the same session.

Enroll now

Consent
Scroll to Top