Professional diploma800 h · Online · 8 modules

Professional Diploma in Marine Lighting and Ambience Design

This professional diploma shows you how to transform spaces on board through light and design. You will learn architectural, functional and decorative lighting techniques that combine safety, comfort and aesthetics in the marine environment, and get to know the materials and technologies involved, from smart control systems to energy-efficient LED solutions, to create memorable atmospheres on yachts, cruise ships and commercial vessels.

Duration800 h
ModeOnline
Start1 December
Modules8
Program diagnosis

Prior knowledge check

These are the skills this program gives you. Tick the ones you already master and we will tell you which part of the syllabus is for you.

Your diagnosis
6of 6 to cover

You are starting from scratch in this subject. The program is designed precisely for that.

About the program

What is the Professional Diploma in Marine Lighting and Ambience Design?

This professional diploma covers ship lighting from regulation to atmosphere. You will study photometric units, color temperature, color rendering, glare and IP protection against salt and spray; navigation lights under the COLREG, emergency and escape route lighting, deck, lifeboat and helideck lighting and explosion-proof fittings; ergonomic lighting on the bridge and in the engine control room, circadian lighting in cabins and glare control; lighting design for superyachts and cruise ships, underwater and exterior deck lighting; DALI-2, DMX512, KNX and scene programming; electrical integration, LED drivers, harmonics and electromagnetic compatibility with radio equipment; energy audits and LED retrofits; and lighting plans, DIALux simulation, budgeting and commissioning.

What sets this diploma apart: it joins the creative side of lighting design with the technical and regulatory side that a ship demands, so that a beautiful scheme also meets SOLAS, COLREG and MLC requirements, survives salt, vibration and humidity and does not interfere with VHF and navigation equipment; it gives special weight to crew wellbeing, with night-vision preservation and circadian lighting; it addresses light pollution and the protection of coastal wildlife; and it ends with an integrating project in which you design the full functional, regulatory and decorative lighting system for a commercial ship, cruise ship or large yacht.

Program typeProfessional diploma
ModeOnline
Duration800 hours
Modules8
Start1 December

Program highlights

  • Marine photometry: lux, luminance, color temperature, CRI, glare and IP ratings for salt and spray.
  • Regulatory lighting: COLREG navigation lights, emergency lighting, helidecks and explosion-proof fittings.
  • Interior and wellbeing: bridge night vision, engine control room levels and circadian cabin lighting.
  • Lighting design: superyachts and cruise ships, underwater lights, exterior decks and scenography.
  • Control and electrics: DALI-2, DMX512, KNX, LED drivers, harmonics and EMC with VHF equipment.
  • Integrating project: a complete lighting design with photometric calculations and specification.
Syllabus

Syllabus of the Professional Diploma in Marine Lighting and Ambience Design

8 modules. Select a module to see its content.

Module 1

Fundamentals of lighting engineering, photometry and the marine environment

  • 1.1. Photometric units applied to the maritime field: luminous flux, intensity, illuminance (lux) and luminance
  • 1.2. Properties of light and human perception: color temperature (kelvin), color rendering index (CRI/TM-30) and glare
  • 1.3. Classification of marine environments and IP (ingress protection) ratings against humidity, salinity and water spray
  • 1.4. Behavior of marine materials and finishes under light: reflection, absorption and refraction on metal and polymer surfaces
  • 1.5. International rules on lighting on board: the MLC 2006, SOLAS regulations and applicable ISO/CIE standards
  • 1.6. Modern light sources: marine LED technology, constant-current drivers and energy efficiency on board
  • 1.7. Impact of salinity, atmospheric corrosion and continuous vibration on the service life of marinised luminaires
  • 1.8. Measurement of illuminance and luminance
At this stage
100 hestimated workload
8 wkweeks at your pace
Module 2

Regulatory lighting, nautical signaling and safety

  • 2.1. The International Regulations for Preventing Collisions at Sea (COLREG): navigation lights, shapes and arcs of visibility
  • 2.2. Design and installation of primary and secondary navigation light systems, control panels and failure alarms
  • 2.3. Emergency lighting, escape routes and photoluminescent signage under IMO Resolution A.752(18) and ISO 15370
  • 2.4. Deck lights, mooring lighting fore and aft, lifeboat davits and heavy work areas
  • 2.5. Specific lighting for flight decks and helidecks on board under CAP 437 and ICAO annexes
  • 2.6. Intrinsically safe and explosion-proof lighting (ATEX/IECEx certified) for tanks, dangerous cargo decks and hazardous areas
  • 2.7. Integration of searchlights, night vision and infrared lighting for SAR and security operations
  • 2.8. Navigation lights under the COLREG
At this stage
100 hestimated workload
8 wkweeks at your pace
Module 3

Interior lighting design, habitability and ergonomics

  • 3.1. Ergonomic lighting on the bridge: preservation of night vision (red light and deep dimming) and prevention of reflections on windows
  • 3.2. Lighting design for the engine control room (ECR), workshops and technical areas according to the required lux levels
  • 3.3. Circadian and bioclimatic lighting in cabins and enclosed spaces to reduce the biological disruption caused by watchkeeping
  • 3.4. Lighting design for common areas, mess rooms, corridors and crew recreation areas
  • 3.5. Selection of interior architectural luminaires: recessed fittings, marinised LED strips, wall lights and indirect light coves
  • 3.6. Control of direct and reflected glare with diffusers, secondary optics and strategic positioning
  • 3.7. Management of heat dissipation in luminaires built into thermally and acoustically insulated ceilings
  • 3.8. Lighting of cabins and common areas
At this stage
100 hestimated workload
8 wkweeks at your pace
Module 4

Lighting design, energy efficiency and maritime safety

  • 4.1. Lighting design concepts applied to superyachts, cruise ships and high-end leisure craft
  • 4.2. Lighting scenography: accent lighting, wall washers, indirect and contour lighting
  • 4.3. Underwater lights: technologies, hull sealing, through-hull fittings, materials (bronze, titanium) and penetrating optics
  • 4.4. Integration of light with maritime interior design, fine woods, mirrors and fire-retardant textiles
  • 4.5. Lighting of exterior decks, pool areas, sun decks, terraces and flybridges
  • 4.6. Psychology of light and creating atmospheres: day-night transitions and multifunctional spaces
  • 4.7. Trends in decorative lighting: fiber optics, luminous fabrics and projection mapping systems
  • 4.8. LED lighting and color temperature
At this stage
100 hestimated workload
8 wkweeks at your pace
Module 5

Control systems, automation and network protocols

  • 5.1. Lighting dimming and control protocols: DALI-2, DMX512, 0-10 V and PWM adapted to the maritime environment
  • 5.2. Integration of lighting into building and ship management systems (BMS and marine home automation): KNX, Crestron, Lutron
  • 5.3. Onboard communication networks for lighting: CAN bus, NMEA 2000 and conversion to marinised Ethernet/IP networks
  • 5.4. Programming of automatic lighting scenes, timed events and zone control from touch screens
  • 5.5. Presence, occupancy and daylight sensors to optimize electricity consumption
  • 5.6. Centralized control interfaces for service staff and simplified user panels in cabins and suites
  • 5.7. Cyber security of connected lighting systems and isolation from the ship's operational networks
  • 5.8. DALI and DMX protocols
At this stage
100 hestimated workload
8 wkweeks at your pace
Module 6

Electrical integration, power quality and electromagnetic compatibility (EMC)

  • 6.1. Electrical distribution topologies for lighting systems on board: AC (110 V/230 V) versus DC networks (12 V/24 V/48 V)
  • 6.2. Power supplies, marinised LED drivers and protection against voltage surges and frequency variations
  • 6.3. Electromagnetic compatibility (EMC/EMI): preventing interference from LED drivers with radio and VHF equipment (IEC 60945)
  • 6.4. Phase balancing, harmonics generated by electronic lighting loads and power factor correction
  • 6.5. Electrical redundancy, supply from essential busbars and backup batteries for critical lighting
  • 6.6. Cable routing, fire-retardant marine cabling (IEC 60332), watertight cable glands and marinised junction boxes
  • 6.7. Bonding continuity and earthing to prevent galvanic corrosion linked to the electrical system
  • 6.8. Interference from LED equipment with radio
At this stage
100 hestimated workload
8 wkweeks at your pace
Module 7

Energy efficiency, sustainability and maintenance on board

  • 7.1. Energy audits of the lighting system and its impact on generator load and fuel consumption
  • 7.2. Retrofit projects: replacing fluorescent and halogen systems with efficient LED technology
  • 7.3. Assessment of the carbon footprint and the contribution of lighting to the ship's efficiency indicators (EEXI and CII)
  • 7.4. Preventive maintenance of lighting systems: cleaning optics, checking watertightness and replacing seals
  • 7.5. Diagnosis of common faults: flicker, lumen depreciation, color shift and driver failures
  • 7.6. Management of spare parts on board, standardization of components and recycling of electronic waste in port
  • 7.7. Environmental impact of exterior lighting: light pollution in coastal areas and protection of wildlife (birds and turtles)
  • 7.8. Management of lighting electricity consumption
At this stage
100 hestimated workload
8 wkweeks at your pace
Module 8

Technical specification, budgeting and integrating project

  • 8.1. Preparation of ship lighting plans, single-line diagrams and photometric distribution files (IES and LDT)
  • 8.2. Use of lighting simulation software (DIALux evo, Relux) to calculate illuminance in interior and exterior spaces on board
  • 8.3. Selection of marine manufacturers, interpretation of luminaire data sheets and the approval process with classification societies
  • 8.4. Quantity take-offs, cost estimates for equipment, cable routing and shipyard labor, and return on investment (ROI)
  • 8.5. Management of lighting installation projects during newbuilding and dry-docking
  • 8.6. Acceptance tests, commissioning protocols and on-site photometric verification measurements
  • 8.7. Presentation of the integrating project
  • 8.8. Integrating project: complete design of the lighting system (functional, regulatory and decorative), photometric calculation, control integration and electrical specification for a commercial ship, cruise ship or large yacht
At this stage
100 hestimated workload
8 wkweeks at your pace
Plan your pace

Duration and format of the Professional Diploma in Marine Lighting and Ambience Design

It is 800 hours. Tell us how many you can study each week and we will tell you when you will really finish.

4 h30 h
With 12 h per week
15
months to finish
67 weeks
weeks in total

This is the pace at which most students finish. It fits well with the installment plan.

Faculty

Academic leadership and faculty

The Navalis teaching team: working professionals who teach and supervise the programs.

Dra. Marina AlcoverDr. Marina AlcoverAcademic Director and Head of Quality Assurance
Ing. Diego CifuentesEng. Diego CifuentesSenior Lecturer in Naval Welding and Non-Destructive Testing; Head of QA/QC for Welded Joints
Cap. Javier Abaroa (MCA)Capt. Javier Abaroa (MCA)Senior Lecturer in Ship Handling, Electronic Navigation (ECDIS/Radar/ARPA) and GMDSS; STCW Compliance and Bridge Resource Management Coordinator
Dr. Pau FerrerDr. Pau FerrerSenior Lecturer in Naval Architecture and Simulation; Director of the Hydrodynamics and CFD Laboratory
Dra. Nuria LlobregatDr. Nuria LlobregatSenior Lecturer in Marine Meteorology, SAR and Operational Safety; Navigation Risk Management Coordinator
Ing. Javier BañulsEng. Javier BañulsSenior Lecturer in Electrical Engineering, Automation and ETO Engineering; Electronic Integration and Engine Alarms Coordinator
Ing. Sofía MarquinaEng. Sofía MarquinaSenior Lecturer in Materials, Composites and Corrosion Protection; Coordinator of the Advanced Paints and Coatings Line
Ing. Tomás RieraEng. Tomás RieraSenior Lecturer in Propulsion, Alternative Energy and Hybrid Systems; Energy Performance and Vibration Coordinator
Objectives

Objectives of the Professional Diploma in Marine Lighting and Ambience Design

01Master lighting techniques that create immersive marine atmospheres, using natural and artificial light to evoke water, sky and reflections while keeping good visibility by day and by night.
02Manage lighting in spaces on board to improve safety and visual comfort, adapting it to changing conditions, keeping visibility and minimizing glare.
03Design ambience strategies that highlight the identity and function of each space, choosing decorative and functional elements that improve the user experience and reflect maritime culture.
04Select and use lighting equipment suited to the marine environment, choosing marine LED luminaires by lumen output, IP rating, corrosion-resistant materials and service life, with controls that cut consumption and maintenance.
05Apply the fundamentals of photometry and marine lighting rules, measuring illuminance and luminance and checking designs against MLC 2006, SOLAS and the applicable ISO and CIE standards.
06Assess and improve existing lighting installations by analyzing energy use, service life and maintenance costs and proposing LED retrofits and smart controls that reduce environmental impact.
Careers

Career opportunities after the Professional Diploma in Marine Lighting and Ambience Design

01Marine lighting designerlighting plans for yachts, cruise ships, commercial vessels and marinas.
02Maritime ambience consultantadvice on the design of interior and exterior spaces in marine settings.
03Stage lighting technician on cruise shipslighting for shows and events on board.
04Safety lighting specialistdesign and implementation of navigation, emergency and deck lighting systems.
05Technical sales specialist in marine lightingadvice on and sale of equipment designed for the maritime sector.
06Installer and maintainer of marine lighting systemsinstallation, repair and maintenance on ships and in port facilities.
Frequently asked questions

Questions about the Professional Diploma in Marine Lighting and Ambience Design

The maritime sector, and in particular the design, refit and operation of yachts, cruise ships and commercial vessels, as well as waterfront spaces such as marinas.

It focuses on vessels, covering both interior and exterior spaces on board, although many of the principles also apply to marinas and waterfront venues.

Not necessarily. Basic electrical knowledge helps, and the program explains distribution, LED drivers, harmonics and electromagnetic compatibility from a practical point of view.

Yes. One module deals with COLREG navigation lights, emergency and escape route lighting, deck and helideck lighting and explosion-proof fittings, alongside the design-led modules.

Lighting simulation software such as DIALux evo and Relux for photometric calculations, together with IES and LDT photometric files and the programming of DALI and DMX control scenes.

Yes. It covers night-vision preservation on the bridge, lighting levels in technical spaces and circadian lighting in cabins to reduce the effects of watchkeeping on sleep.

Through practical exercises in each module and an integrating project in which you design the full lighting system for a commercial ship, cruise ship or large yacht, which you can add to your portfolio.

Fully online, with content available 24/7, discussion forums, live sessions that are recorded and tutorials. It comprises 800 hours across 8 modules of about 100 hours each.

Online admission

Admission process

No waiting for a call back. If your documents are in order, you can enroll in the same session.

Entry requirements
  • Profile: aimed at architects and interior designers who want to specialize in yachts, cruise ships and waterfront spaces, professionals in the shipbuilding and hospitality industries, lighting engineers and technicians, decorators and design enthusiasts with a nautical interest; training in interior design, architecture, fine arts, photography or a related discipline, or proven experience in lighting, stage design or ambience design, is recommended, and familiarity with nautical terms, basic electricity and DIALux or Relux is helpful.
  • Language: sufficient command of English to follow the classes and the technical documentation.
  • Technical resources: a computer with a stable internet connection, an up-to-date browser and lighting simulation software such as DIALux evo, which has a free version.
  • Admission: online application, review of your profile and a short interview with the academic team.
  1. 01
    Application
    Your details, background and documents.
  2. 02
    Instant review
    We check that everything is complete and in order.
  3. 03
    Enrollment
    Choose full payment or instalments and reserve your place.
Start my applicationFrom $472 deposit

Admission is provisional until the committee validates the documents provided. If you do not meet the requirements, the full amount is refunded.

Any questions?

Ask us before you enroll

Leave your details and admissions will write to you to answer any questions. If you are already sure, you can apply and pay in the same session.

Enroll now

Consent
Scroll to Top